LED street lamps need to be waterproof and anti-corrosion

LED street lamps need to be waterproof and anti-corrosion Because the working environment of LED street lights is outdoors, exposed to wind and rain, the materials of LED street lights are preferably waterproof and corrosion-resistant. The anti-corrosion treatment of LED light poles adopts hot-dip galvanizing on the surface and then plastic spraying treatment. The anti-corrosion quality meets the regulations. The average thickness of the hot-dip galvanizing layer is not less than 85 μm. , The plastic-sprayed layer is uniform, complete, and the surface is smooth, and its adhesion meets the requirements of relevant standards. The inspection door under the LED lamp pole is parallel to the axis of the lamp pole, and the inspection door is 400mm above the ground and opened at a height of 320mm×120mm. The ground terminal is welded in the door; the edges of the door hole and the door cover are smooth and flat, and there is a gap between the door cover and the door hole and the door after assembly. No more than 2mm, the door cover is interchangeable, and has effective and reliable anti-theft measures.