What preparations should be made before installation and installation of solar led street lights

What preparations should be made before installation and installation of solar led street lights Before installation and installation of the solar led street light, it is necessary to determine the position of the light; survey the geological conditions, if the ground surface is 1 meter 2 soft soil, the depth of excavation should be deep; at the same time, confirm that there are no other facilities (such as cables, pipelines, etc.) under the excavation position, street lights The sunshade cannot be placed on the top for a long time, otherwise the position should be changed appropriately. Reserve (excavate) a 1.3m pit that meets the standard for installing lamps; position the pouring parts. The embedded components are placed in the middle of the square pit, one end of the PVC threading pipe is placed in the middle of the embedded parts, and the other end is placed in the battery for storage.

Pay attention to put the foundation pit in place, so that the base and the foundation pit are on the same level (or according to the needs of the site, the top of the screw rod and the level of the original ground are the same), and the other side should be parallel to the road, so as to ensure that the light pole The rear end is upright and not biased. Then use C20 to pour and fix it. When pouring, the vibrating rod should not be stopped to vibrate to ensure that the whole is dense and firm. After the construction is completed, it should be cleaned in time.