How to cut and install wireless LED strip light(high voltage)

Compared with CE high-voltage LED strip light outdoor, wireless outdoor high voltage or low voltage LED strip light are with low cost, environmental protection,durability, and high waterproof performance.So it is widely used in outdoor or indoor areas with high waterproof requirements.

Installation and Operation are professional, but not difficult. It is mainly divided into the installation of the power cord of led strip, the installation of the end cap of led strip light, and the installation of the middle connector of LED wireless flexible strip light.

First,before the installation of wireless high voltage waterproof outdoor LED stirp light,the accessories and tools shall be prepared as below,

Second,there are several steps to connect the power cord to the led strips;

1.Put a heat shrink tubing on the led strip

2.Apply the PVC glue on the led strip

3.Connect the power cord connector with the led strip

4.Put two inner button and two outter button on the joint,and secure by a plier

5.Put the heat shrink tubing on the joint

6.Shrink the heat shrink tubing with a blower

Third,there are several steps to connect the end cap to the led strips;

1. 1.Apply the PVC glue on the led strip

2. 2.Connect the end cap to the led strip

3. 3.Put a heat shrink tubing on the joint

1. 4.Shrink the heat shrink tubing with a blower

At last,how to cut the wireless outdoor led strip light,please see here.Use professional cutters to cut against the position where the scissors are printed.

And then there are several steps to connect the middle connector to the led strips;

1.Put a heat shrink tubing on each led strip

2.Apply the PVC glue on the led strip

3.Connect the led strips with the middle connector

4.Put a inner button and a outter button on the two joints,and secure by a plier

5.Put the heat shrink tubing on the joints

6.Shrink the heat shrink tubing with a blower

Recommended article:

1.How to choose a LED strip light

2.How to choose high brightness and low power consumption saving LED strip or tape lights?

3.The positive and negative of high voltage LED strip light and low voltage LED strip light

4.How to cut and use LED strip lights(Low voltage )