how to install led strip lights outdoors

                                                                                                                                                                             Outdoor IP65 waterproof led strip light

The outdoor installation of LED strip light pays more attention to the [waterproof] and [firm] installation of the LED strip light.

Preparatory work

Before installing the outdoor led strip lights, some preparation work needs to be done, including cleaning the installation location, accurately measuring the length, selecting the appropriate light strips, and purchasing related materials.

Silicone glue LED strip light IP68

Outdoor light strip installation method

1. Double-sided adhesive fixation method: Use strong double-sided adhesive to fix the LED strip light. This method is simple and convenient to operate and will not cause damage to the wall. However, it should be noted that in outdoor environments, especially when the temperature is too high or too low, the adhesion of the double-sided adhesive will be affected, and high-quality high-temperature/low-temperature resistant double-sided adhesive needs to be selected.

2. Silicone fixation of light strips: In order to set up LED strip light outdoors, a simple and effective method is to use silicone. First, determine the location where the light strip is to be installed and make sure the surface is dry and clean. Then, apply a layer of silicone evenly on the back of the light strip and stick it tightly to the desired location. Silicone can provide reliable adhesion and water resistance, ensuring that the light strip can remain firm in all weather conditions. In addition, silicone is flexible and suitable for fixing irregular shapes such as curves and corners.

3. Clips to clamp the light strip: Another common way to attach outdoor light strips is to use clips. The clips can be plastic clips, metal clips or spring clips, depending on the thickness and material of the light strip. It should be noted that when choosing a clip, make sure it is weather-resistant and corrosion-resistant to adapt to changes in the outdoor environment. Fix the clip in the desired position, and then gently clamp the light strip into the clip, ensuring that it is clamped but not damaged. The clip fixing method is simple and reliable, and is suitable for occasions where the light strip does not need to be replaced frequently.

4. Buckle fixing method: This method is suitable for installation on thicker pipes such as railings and fences. Use a fixing belt to clamp the light strip on the pipe, which is convenient and stable, but a fixing belt of appropriate width needs to be selected to ensure stability.

5. Screw fixing method: Use screws to fix the light strip. You need to drill holes at the installation location first, and then fix the screws to the wall. This method requires certain practical experience and skills, and requires the use of tools such as electric drills and screwdrivers to complete, but the fixing effect is more stable and reliable, and is suitable for installation in locations where the structure bears load, such as exterior walls and door frames.

6. Shell protection light strip: If you want to install the outdoor led strip light more firmly and safely, you can consider using a dedicated shell. These shells are usually made of sturdy materials such as aluminum alloy or plastic. Put the strip light outdoors into the shell and fix it in the desired position according to the method provided in the instruction manual. This method can not only effectively fix the light strip, but also protect it from wind, rain, sunlight and other adverse weather conditions. The shell can also prevent the LED strip light from being hit and damaged by external objects, thereby increasing its service life.

 LED light strip power supply connection method:

1. For DC low-voltage LED light strips, a switching power supply is required. The size of the power supply is determined according to the power and connection length of the LED light strip. If you do not want each LED light strip to be controlled by a power supply, you can buy a relatively large power switching power supply as the main power supply, connect all the input power supplies of all LED light strips in parallel (if the wire size is not enough, it can be extended separately), and the main switching power supply is used for power supply. The advantage of this is that it can be centrally controlled, but the inconvenience is that it cannot achieve the lighting effect and switch control of a single LED light strip. You can decide which method to use.

2. There is a "scissors" mark on the LED light strip, which can only be cut at the marked position. If it is cut wrong or off-center, the unit length will not light up! It is best to look carefully at the position of the mark before cutting.

3. Pay attention to the connection distance of the LED light strip: Whether it is an LED SMD light strip or a COB light strip, if it exceeds a certain connection distance, the LED light strip will be used. The service life will be affected due to excessive heat. Therefore, when installing, it must be installed in accordance with the manufacturer's requirements, and the LED light strip must not be overloaded.

Pay attention to safety

1. Pay attention to your own safety during installation, and try to use a suitable ladder or tool to avoid accidents such as climbing and falling.

2. After installation, apply waterproof glue to the tail plug and the plug, so that the waterproof performance is better. Avoid short circuits or other safety hazards in rainy days or high humidity.

Silicone LED flexible neon lights

About the use of tools

In the process of attaching LED strip light outdoors, some tools are also indispensable, such as: electric drill, screwdriver, ladder, tape, fixing belt, etc.

Summary

The installation of outdoor light strips is very important for home decoration. By choosing the appropriate fixing method and paying attention to safety, you can make your outdoor light strips more stable and beautiful. Before installation, be sure to carefully measure the location, choose the appropriate installation location, and use the appropriate tools and materials to complete the installation process to meet your aesthetic and practical needs.

[Note] The information provided in this article is for reference only. If you still have questions, it is recommended that you consult relevant professionals and comply with local installation standards and specifications.

 Recommended articles：

1.LED light strips installation

2.The positive and negative of silicone led strip and precautions for use

3.Types of Exterior waterproof outdoor LED strip lights

4.The LED Neon flexible strip light installation

5.How to cut and install wireless LED strip light(high voltage)

6.The positive and negative of high voltage LED strip light and low voltage LED strip light

7. How to cut and use LED strip lights(Low voltage )

8. How to choose a LED strip light

9. How to choose high brightness and low power consumption saving LED strip or tape lights?