Precautions during installation of solar led street lights and points for wind resistance selection

Precautions during installation of solar led street lights and points for wind resistance selection Precautions during installation of solar led street lights and points for wind resistance selection LED street light pole design specifications and standards LED street lights as a whole have specific specifications and standards before design. Whether it is LED street light head, driving power supply, LED street light pole and embedded parts, they all have design specifications and standards. These must meet the normal specifications and standards, so that LED street lights can be used normally and safely.

Round pole and vertebral pole: The conventional types of street light poles include round pole and tapered pole. Round pole refers to the same upper and lower diameters. Where the height of the light pole is higher, the vertebral pole has better mechanical strength and wind resistance than the round pole. Wind resistance level: The wind resistance level of the light pole is directly related to the height and wall thickness of the light pole. We can design according to the different requirements of customers to meet the corresponding wind resistance requirements of customers. Many solar led street light projects in rural areas are just face projects. Conventional light poles are rolled and welded with Q hot-rolled steel sheets. After hot-dip galvanizing, they have good corrosion resistance and oxidation resistance. Improve corrosion resistance and oxidation resistance, and the light pole after hot-dip galvanizing and spraying has a service life of more than one year.

The wall thickness of the light pole should not be too small, because the phenomenon of uneven roundness will appear during the rolling process of the wall thickness of the light pole that is too small, which will affect the overall aesthetics and mechanical properties of the light pole, and the wall thickness of the light pole that is too thick will cause The weight of the light pole increases, and the cost rises. Therefore, the selection of the light pole should consider the lighter the weight while meeting the customer's requirements. The diameter of the lamp arm is mostly mm and mm, which can be installed and fixed smoothly. If the lamp arm requires a special size, it is necessary to add a reducing sleeve to facilitate the fixed installation of the lamp.

It is enough to be waterproof like ordinary lights. When designing the wind resistance level of street light poles, you should know the basic information such as the upper and lower diameters of the light poles, the wall thickness of the light poles, the size of the wind resistance, the height of the light poles, and the material of the light poles. You also need to know The length of the lamp arm, the size of the battery board, the angle of the battery board, whether there is a wind turbine, the size of the lamp and other parameter information can be more comprehensively designed for the wind resistance level, so as to fully meet the customer's requirements.