What new LED street lights with long life and good vibration resistance should do

What new LED street lights with long life and good vibration resistance should do The new LED street lamp with long service life and good vibration resistance should be provided with several openings on the light-transmitting plate, and the lens is embedded in the opening; a sealing gasket is arranged between the light-transmitting plate and the heat dissipation lamp housing; The top of the lamp housing is provided with a top ventilation hole; a number of middle ventilation holes are provided between the adjacent transparent plates; the new LED street lamp head, wherein the thickness of the lens is 2.0-2.5mm. Road lighting is an important part of urban lighting. Traditional street lights often use high-pressure sodium lamps to emit light at 360 degrees. However, this kind of lamp has the disadvantage of large light loss, which will cause a huge waste of energy. At present, the global environment is deteriorating day by day, and all countries are developing clean energy.

With the rapid growth of the national economy, the contradiction between energy supply and demand in my country has become increasingly prominent, and there has been a serious shortage of power supply. Energy conservation is an urgent problem to be solved. Therefore, the development of new high-efficiency, energy-saving, long-life, high color rendering index, and environmentally friendly street lamps is of great significance to energy-saving urban lighting. The above description has gradually entered people's field of vision for LED street lights with the advantages of directional light emission, low power consumption, good driving characteristics, fast response speed, high shock resistance, long service life, and environmental protection, and has become a new generation with the advantages of replacing traditional light sources. Energy-saving light sources have become a good choice for energy-saving renovation of road lighting.

However, most of the existing LED street lamps are complex in structure, poor in heat dissipation, and inconvenient to adjust the irradiation angle of the light, and the street lamps are all installed on the support poles high in the air, and the support poles will vibrate due to wind and rain. Some street lamps have poor vibration resistance, which will not only reduce the service life of the street lamps, but also make the street lamps loose, which poses a greater safety hazard. The new type of LED street lamp head includes a base that was previously installed on the bottom of the heat dissipation lamp housing, and an LED lamp board is provided on the outer surface of the heat dissipation lamp housing, and a light-transmitting plate is provided on the outside of the LED lamp board , the light-transmitting plate is provided with several lenses, the bottom of the base is provided with a mounting pipe, the mounting pipe includes an outer cast iron layer arranged on the outer layer, and a vibration-damping layer is arranged on the inner side of the outer cast iron layer, The interior of the damping layer is filled with sponge, and several aluminum honeycomb coils are embedded in the sponge, a steel wire mesh layer is arranged inside the vibration damping layer, and an inner steel plate layer is arranged inside the steel mesh layer. Advantages and measures: LED light board is installed on the outer surface of the heat dissipation lamp housing, a light-transmitting plate is arranged on the outside of the LED light board, several lenses are arranged on the light-transmitting plate, and a mounting tube is set on the bottom of the base, and the mounting tube includes a set On the outer cast iron layer of the outer layer, a vibration-damping layer is arranged on the inner side of the outer cast-iron layer, and the interior of the vibration-damping layer is filled with sponge, and several aluminum honeycomb rolls are embedded in the sponge, and a steel mesh layer is arranged on the inner side of the vibration-damping layer, and the steel mesh The inner side of the layer is provided with an inner steel plate layer.

The overall structure is simple and the design is reasonable. The whole lamp housing can dissipate heat. There are several cooling holes on the heat dissipation lamp housing to make the heat dissipation effect better. Even better, the lamp body will not loosen after long-term use, and the service life is longer.